Grease Molykote
MH-62
Description
Synthetic hydrocarbon oil/lithium soap grease containing specially formulated solid lubricants.
Operating temperatures
-50°C +150°C
Pre-packing
16kg
- Applications
- Friction units
- Advantages
- Problems to be solved with this material
- The combination of materials
- Features
Applications
DESCRIPTIONMolykote MH-62 (USA) Grease is a synthetic hydrocarbon oil/lithium soap grease containing specially
formulated solid lubricants. It had good compatibility with plastics, a wide service temperature range of -50 to 150°C (-58 to 302°F), and a high loadcarrying capacity.
TYPICAL APPLICATIONS
Molykote MH-62 (USA) Grease is designed primarily for plastic/plastic, metal/metal, and metal/plastic lubrication in electromechanical applications such as automotive HVAC components and cables. Examples include control cables, precision electric motors, antennas, audio equipment, and bearings under light to moderate loads.
It is used in friction
Sliding bearings
Sliding guideways
Enclosed gears
Cased control cables
Advantages
- Cold resistance
- Termal (heat) resistance
- Higher load carrying capacity
- Working capacity in moisture
- Working capacity in dust
- Good anticorrosion properties (good corrosion protection)
- Good water washout resistance
- Compatible with many plastics
- Avoidance of stick-slip
Problems to be solved with this material
- Seizure
- Stick-slip motion
- Dust intrusion into lubricating points and abrasive wear
- Corrosion
- Lubricant wash-out
- Frequent re-lubrication
- Plastic and elastomer details deformation and destruction
Material combination in friction pair
- Metal - Metal
- Metal - Plastic
- Plastic - Plastic
| Стандарт | Показатель | Ед. изм. | Значение |
|---|---|---|---|
| — | Базовое масло | Полиальфаолефин | |
| — | Загуститель | Литиевое мыло | |
| — | Антифрикционные добавки (наполнители) | Политетрафторэтилен (ПТФЭ) и другие твердые смазочные материалы | |
| — | Диапазон рабочих температур | °С | от -50 до +150 |
| — | Класс консистенции по NLGI | 2 | |
| — | Нагрузка сваривания (испытание на четырехшариковой машине трения, 1450 об/мин/10 с), | Н | >2943 |