Engineering solutions in the field of
lubricants and sealants



Silicone-based compound, heavy consistency.

Operating temperatures

-40°C +204°C


  • Applications
  • Friction units
  • Advantages
  • Problems to be solved with this material
  • Related videos
  • Recommended by manufacturers
  • The combination of materials
  • Features



Wide service temperature range (-40°C/-40°F to 200°C/392°F)
Excellent water resistance
Compatible with many plastics and elastomers
Low vapor pressure
Low volatility
Meets several global standards for water contact


Lubrication for control and pressure plug valves, water softener and faucet valves.
Sealant for vacuum and pressure systems.
Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
Damping medium for dash pots in electrical and electronic equipment.
Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
Rubber and plastic O-rings, gaskets and seals.

It is used in friction

  • Gaskets
  • Electrical contacts


  • Cold resistance
  • Termal (heat) resistance
  • Chemical resistance
  • Working capacity in vacuum
  • Working capacity in moisture
  • Listed under NSF Standard 51 for use in food processing equipment
  • WRAS approved (to be used in drinkable water supply systems)
  • DVGW approved (to be used in gas supply system equipment)
  • Listed under NSF Standard 61 for use in potable water applications
  • Good anticorrosion properties (good corrosion protection)
  • Good water washout resistance
  • High dielectric strength
  • No drop point
  • Compatible with many plastics
  • Compatible with many elastomers
  • Easy mounting / dismounting

Problems to be solved with this material

  • Details sticking after technological operations (pressure forming, molding, etc...)
  • Corrosion
  • Lubricant wash-out
  • Lubricant destruction of chemically active medium exposure
  • Lubricant efficiency loss in vacuum
  • Electrical breakdown
  • Frequent re-lubrication
  • Difficult mounting / dismounting
  • Plastic and elastomer details deformation and destruction

Related videos

Recommended by manufacturers

  • Areva
  • Avdel
  • AVK
  • Baxi
  • BMW Motorrad AG
  • Bosch Security Systems
  • BRP-Rotax GmbH
  • BSA Guns
  • De Dietrich
  • Dräger Safety AG & Co.
  • Dynameters
  • Flowserve
  • Geolink
  • Goat throat
  • Habonim (Compact4)
  • Honda
  • Hydrobond Engineering
  • Jeep
  • KSB
  • Leica
  • Lumascape
  • Marin
  • Maxwell
  • Nikon
  • Phoenix contact
  • Thompson valves
  • Tyco
  • Waikato
  • Westen

Material combination in friction pair

  • Metal - Metal
  • Metal - Plastic
  • Metal - Elastomer
  • Plastic - Plastic
  • Plastic - Elastomer
Стандарт Показатель Ед. изм. Значение
ЦветБелый, полупрозрачный
Базовое маслоМетилсиликоновое
ЗагустительНеорганический загуститель
Диапазон рабочих температур°Сот -40 до +204
DIN ISO 2137Пенетрация неперемешанной смазкимм/10170…230
DIN ISO 2137Пенетрация перемешанной смазки (60 циклов)мм/10260
Класс консистенции по NLGI2…3
Температура плавления°СНет
Плотность при 25 °Сг/см31,0
Диэлектрическая проницаемость при 100 Гц/100 кГц2,88/2,95
Диэлектрические потери при 100 Гц/100 кГц0,0001/<0,0005
Электрическая прочность диэлектрика при зазоре 1,27 ммкВ/мм>17,72
Удельное сопротивление при 23 °СОм*см2,17 х 1015
CTM 0033AПотери на испарение (24 ч, 200 °C)%2,0
CTM 0033AВыделение масла (24 ч, 200 °C)%0,5
Пищевой допуск: соответствие стандартам NSF/ANSI 51 (материалы для применения в оборудовании при производстве продуктов питания) и NSF/ANSI 61 (материалы для применения в системах питьевого водоснабжения)NSF/ANSI 51, NSF/ANSI 61
Пищевой допуск: соответствие стандартам FDA 21 CFR (для материалов с возможностью случайного контакта с продуктами питания)FDA 21 CFR 175.300