Engineering solutions in the field of
lubricants and sealants


Colorless Adhesion Promoter based on acrylate-silicone-copolymerics, designed to enhance adhesion of MS-hybrid and silicone sealants, applicable on non-absorbent and absorbent substrates.


  • Applications
  • Features


Wood, concrete, mortar, Eternit, etc.
This material is to be applied in cases where highest water resistance is required, e.g. swimming-pools, indoor swimming pools, fitness centers, etc). The open-time is at +20°С at least 60 minute. At latest 4 hours after putting on the Adhesion Promoter the application of the sealant or adhesive is to be done (at the longer waiting times the procedure must be repeated again).
It is indicated as well as waterproofing Adhesion Promoter on bituminous surfaces.
For little absorbing surfaces we recommend to dilute Adhesion Promoter V17 with up to 25% Xylol.

Adhesion Promoter V17 is moisture-sensitive. Immediately close the container after use.
The material may leave stains which are difficult to remove from the substrate. Do not wait until residues are dried up, remove immediately.

• Storage: dry and cool
• Shelf life: 12 months from production date in the unopened original packaging
Стандарт Показатель Ед. изм. Значение
Внешний вид (консистенция) Жидкость средней вязкости
Нижняя рабочая температура°С+10
Плотность при 20 °Сг/см30,95 +/- 0,02
Время сушки при 20 °Сминминимум - 60, максимум - 240