EFELE MG-213 Complex Lithium Grease with EP additives
Description
Multipurpose thermo resistant grease (EP 2 Type) based on lithium complex containing extreme pressure additives. It is intended for long-term lubrication of the units operating under conditions of high temperatures and increased loads
Мы можем предоставить вам образец.
Бесплатный образец предоставляется только для юридических лиц
Заказать образец
Operating temperatures
-30°C +160°C
Pre-packing
10 g10x10 g400 g400 g LS5 kg18 kg180 kg
- Applications
- Friction units
- Advantages
- Problems to be solved with this material
- Video review
- The combination of materials
- Features
Applications
- Rolling and sliding friction units of the equipment in the woodwooking, polymer, metallurgy, and other industries under conditions of high temperatures and high humidity
- Undercarriage of cars, tractors, excavators, bulldozers, loaders, and other vehicles operating under severe operation conditions
- Bearings of electric engines, fans, drying kilns
- High-loaded bearings of the general industrial equipment which are exposed to aggressive environment and elevated temperatures
It is used in friction
Rolling bearings
Sliding bearings
Sliding guideways
Linear bearings
Advantages
- Termal (heat) resistance
- Higher load carrying capacity
- Working capacity in moisture
- Good anticorrosion properties (good corrosion protection)
- Good water washout resistance
- Long service life
- Excellent wear protection
- Strong mechanical stability
- High melting point
Problems to be solved with this material
- Seizure
- Corrosion
- Lubricant wash-out
- Frequent re-lubrication
Video review
Material combination in friction pair
- Metal - Metal
| Стандарт | Показатель | Ед. изм. | Значение |
|---|---|---|---|
| — | Соответствие стандарту DIN 51502 | KP 2 P‐30 | |
| — | Цвет | Синий | |
| — | Базовое масло | Минеральное | |
| — | Загуститель | На базе литиевого комплекса | |
| — | Диапазон рабочих температур | °С | от -30 до +160 |
| ASTM D 445 | Кинематическая вязкость базового масла при 40 °С | мм2/c | 220 |
| ASTM D 217 | Пенетрация перемешанной смазки (60 циклов) | мм/10 | 265-295 |
| — | Класс консистенции по NLGI | 2 | |
| ASTM D 566 | Температура каплепадения | °C | >250 |
| DIN 51811 | Степень коррозии на медной пластине | 1а | |
| ASTM D2596; DIN 51350 pt.4 | Нагрузка сваривания (испытание на четырехшариковой машине трения, 1450 об/мин/10 с), | Н | 2800 |
| ASTM D2266; DIN 51350 pt.5 | Показатель износа (испытание на четырехшариковой машине трения, 1200 об/мин/392 Н/75 °C/1 ч) | мм | 0,4 |