Engineering solutions in the field of
lubricants and sealants

Materials: Molykote
Grease Molykote 33 Medium


Lubricants for antifriction bearings and plastic and rubber parts.


Material Safety Data Sheet - Molykote 33 Medium Technical Data Sheet - Molykote 33 Medium

Operating temperatures

-73°C +204°C


100g 1kg 5kg 25kg 50kg 180kg
  • Applications
  • Friction units
  • Advantages
  • Problems to be Solved material
  • Recommended by manufacturers
  • The combination of materials
  • Features



Resistance to oxidation, moisture and corrosive atmospheres
Good shear stability
Wide service temperature range: -100 to 400°F (-73 to 204°C)
Compatible with many plastics


Freezer cart casters and cold room conveyor equipment
Utility disconnect switch contacts
Plastic electric clock motors
Maximum-demand meters, power-factor meters, watt-hour meters
Windshield wiper motor gears
Photographic, optical and surveying equipment
Oscillographs, geophysical and light, low-torque instruments
Starter clutch drives

It is used in friction

  • Rolling bearings
  • Sliding bearings
  • Sliding guideways
  • Linear bearings
  • Enclosed gears
  • Open gears
  • Cased control cables
  • Cased flexible shafts
  • Gaskets


  • Cold resistance
  • Termal (heat) resistance
  • Working capacity in moisture
  • Good anticorrosion properties (good corrosion protection)
  • Good water washout resistance
  • Long service life
  • Good shear stability at low temperatures
  • Compatible with many plastics
  • Compatible with many elastomers

Problems to be Solved material

  • Corrosion
  • Lubricant wash-out
  • Frequent re-lubrication
  • Plastic and elastomer details deformation and destruction

Recommended by manufacturers

  • Chattanooga group
  • Delorean motor company
  • Kongsberg
  • Quality Bearings & Components
  • Renault
  • Theoben
  • Thompson valves

The combination of materials friction pair

  • Metal - Metal
  • Metal - Plastic
  • Metal - Elastomer
  • Plastic - Plastic
  • Plastic - Elastomer
Стандарт Показатель Ед. изм. Значение
Базовое маслоСиликоновое
ЗагустительЛитиевое мыло
°СДиапазон рабочих температурот -73 до 204
мм*об/минФактор скорости≤200000
DIN 51 562мм2/cКинематическая вязкость базового масла при 25 °С100
ASTM D 217мм/10Пенетрация перемешанной смазки (60 циклов)280
DIN 51 818Класс консистенции по NLGI2
ASTM D 2265°CТемпература каплепадения226
ISO 2811г/см3Плотность при 25 °С0,97
Fed Std 791%Выделение масла (24 ч, 150 °C)1
DIN 51 817, Fed Std 791-32/2%Выделение масла (168 ч, 40 °C)1,6
DIN 51 350 pt.4ННагрузка сваривания (испытание на четырехшариковой машине трения, 1450 об/мин/10 с),1200
ASTM D 1478-80H*мМомент сопротивления вращению подшипника качения при пониженной температуре -73 °С при запуске / через 20 мин после запуска / в рабочем режиме0,164/0,022/-