Engineering solutions in the field of
lubricants and sealants
+7 (495) 974-97-73
Рус Eng
Рус Eng


Buy
Promo page

Description

The Kit includes anti-friction solid lubricating coating + special cleaner-activator



Operating temperatures

-70°C +260°C

Pre-packing

520 ml Aerosol Can + 210 ml Aerosol Can
  • Applications
  • Friction units
  • Advantages
  • Related videos
  • Features

Applications

1. First, clean the surface of the strongly fixed contaminations (such as carbon deposit, oxide films, residues of the previous coating) in any available mechanical or chemical way.

2. Use MODENGY Special Cleaner-Activator to prepare and clean the surface. Only it can guarantee good adhesion.

3. Shake the aerosol can of the MODENGY Special Cleaner-Activator several times. Spray the agent onto the surface from the distance of 15 to 20 cm until it is entirely covered. Wait for at least 15 minutes until the agent evaporates completely.

4. If necessary, spray out another layer of the coating. Don’t touch the prepared surface!

5. As soon as the agent completely evaporates, the surface is ready for applying the AFSLC as the next step.

6. Prior to apply the AFSLC, keep shaking  the aerosol can with the coating for at least 3 minutes since the moment you can hear tapping sound of a small ball inside it.

7. Spray out the coating from the aerosol can onto the surface to be treated from the distance of 25 to 30 cm

8. Let the coating some time to dry for at least 10 minutes at room temperature until opacity appears (it’s the interim air-drying stage)

9. Apply the second layer of the coating if necessary

10. To clean the nozzle of the spraying head turn the aerosol can with the coating upside down and direct it away from yourself. Then push the spraying head button and keep it pressed until the liquid agent stops coming out, and pure gas starts coming out instead of it.

11. Let the coating dry for at least 12 hours at room temperature (it’s the final air-drying stage)


It is used in friction

Piston skirts of the cars and motorcycles
Before
After
MODENGY FOR ICE PARTS based on highly purified molybdenum disulfide and graphite is applied both onto the pistons and the parts of the engines under repair. This coating enables to reduce friction and wear of the piston skirts, to prevent scuffing forming, as well as greatly extend service life of the engine
Сamshaft and crankshaft bushings of the internal-combustion engines
Before
After
MODENGY FOR ICE PARTS prevents scuffing occurrence, reduces wear of the camshaft and crankshaft bushings even under extreme vehicle operating conditions, at pressure drop, or insufficient oil amount
Throttle valves
Before
After
Application of MODENGY For ICE Parts enables to provide throttle valve smooth motion and its sensibility increase, it can prevents mechanism jamming, improve tightness, minimize wear of the interacting surfaces
Splined joints
Before
After
MODENGY For ICE Parts coating extends service lifetime of the splined joints due to reducing friction, and its high wear resistance
Valve rods
Before
After
Applying of MODENGY For ICE Parts onto the valve rods improves their operation reliability
Threaded fasteners
Before
After
MODENGY For ICE Parts stabilizes friction, prevents thread ‘galling’, jamming, and sticking. It makes threaded connections mounting and dismantling easier

Advantages

  • It increases the engine’s efficiency coefficient
  • It protects against scuffing at the engine cold start
  • It prevents scuffing in the oil starvation mode
  • It serves as anti-emergency coating when engine gets overheated
  • It reduces fuel consumption
  • It reduces friction
  • It reduces friction
  • It slows down wear
  • It has the balanced aerosol package with accurately adjusted spraying parameters for uniform applying
  • It cures at room temperature 
  • It extends the engine service life

Related videos

Стандарт Показатель Значение Ед. измерения

—

Цвет

Серо-черный

 

—

Диапазон рабочих температур

-70 … +260

°С

—

Нормативный расход покрытия  210  мл / м2

—

Температура полимеризации / время

+170 / 20 или

+20 / 720

°C / мин

Customer reviews


		

		
		
		
		

			
		

	

	
Яндекс.Метрика