description

This item’s formula has been changed. The new item is Molykote D-96-NTP. Air drying water-based coating for light loads and anti-squeak properties.

Applications –

FEATURES

Cured film has an operating temperature range of -60 to 240°C (-76 to 464°F)

APPLICATIONS

Recommended for the lubrication/corrosion protection of metal/metal and metal/plastic pairings under low to medium loads.
Applied coating is a solid film lubricant designed to provide lubrication properties and corrosion protection plus a high quality surface finish.
Automotive applications for this material include safety belt components, transmission parts, door locks, etc.

It is used in friction

  • Sliding guideways
  • Gaskets

Advantages

  • Cold resistance
  • Chemical resistance
  • Working capacity in moisture
  • Working capacity in dust
  • Good adhesion strength
  • Good water washout resistance
  • Compatible with many plastics
  • Air drying
  • Avoidance of stick-slip
  • Excellent anti-squeak performance for plastics and leather

Problems to be Solved material

  • Stick-slip motion
  • Dust sticking onto lubricating surfaces
  • Dust intrusion into lubricating points and abrasive wear
  • Lubricant wash-out
  • Lubricant destruction of chemically active medium exposure
  • Lubricants leaking off or emission due to centrifugal forces
  • Frequent re-lubrication
  • Plastic and elastomer details deformation and destruction
  • Friction squeaking of plastics and leather
  • Liquid and consistent lubricants application failure

The combination of materials friction pair

  • Metal - Plastic
  • Plastic - Plastic
  • Plastic - Leather
  • Leather - Leather

FEATURES

Стандарт
Показатель
Ед. изм.
Значение
Цвет
Прозрачный
Антифрикционные добавки (наполнители)
Твердые смазочные материалы: политетрафторэтилен (ПТФЭ)
Прочие составляющие
Органический связующий агент (полиуретан), вода, стабилизатор
CTM 0242 I
Содержание нелетучего остатка
%
48
Диапазон рабочих температур
°С
от -40 до +80
DIN 53 211/4
Условная вязкость при 20 °С (тигль DIN4)
с
18
DIN 53 213
Температура вспышки
°C
70
DIN 53 217/2
Плотность при 20 °С
г/см3
1,3
CTM 0007 A
pH при 20 °С
8
Срок годности при хранении
лет
0,75
DIN 53 375-B
Коэффициент трения покоя / скольжения (механизм анти-скрип)
0,2/0,14
Время сушки при 20 °С
мин
10-15
Условия отверждения (выдержка/температура)
мин/°С
120/23