Engineering solutions in the field of
lubricants and sealants

Materials: Molykote
Paste Molykote D Paste

Operating temperatures

-25°C +250°C

Pre-packing

50g 400ml 1kg 5kg 25kg
  • Applications
  • Friction units
  • Advantages
  • Problems to be Solved material
  • Recommended by manufacturers
  • The combination of materials
  • Features

Applications

FEATURES

High load-carrying capacity
Prevents stick-slip and seizure
Good corrosion protection
Excellent protection against galling and fretting corrosion
Cleanness

APPLICATIONS

Sliding surfaces and friction contacts exposed to heavy loads, requiring "clean" lubrication, particularly at low speeds, and as a running-in lubricant.
Used successfully, for example, on many friction contacts of electrical and domestic appliances, packaging and office machinery, precision instruments, machinery in foodstuffs and beverages industry, as well as in textile and plastics processing machinery.
Wherever thin-film lubrication is impossible, the white multi-purpose grease-paste MOLYKOTE DX Paste is recommended. This can also be applied with a brush or rag, and may even be applied with a grease-gun.

It is used in friction

  • Sliding bearings
  • Sliding guideways
  • Linear bearings
  • Interference fits
  • Threaded connections
  • Strips
  • Spline / key joints

Advantages

  • Termal (heat) resistance
  • Higher load carrying capacity
  • Working capacity in moisture
  • Good anticorrosion properties (good corrosion protection)
  • Good fretting corrosion protection
  • Emergency properties
  • Aerosol
  • Avoidance of stick-slip
  • Provides constant torque for threaded connections
  • Easy mounting / dismounting

Problems to be Solved material

  • Seizure
  • Stick-slip motion
  • Brinelling or false brinelling
  • Fretting corrosion
  • Corrosion
  • Frequent re-lubrication
  • Difficult mounting / dismounting
  • Lubrication points inaccessibility
  • Unstable torque because of wide range friction coefficient

Recommended by manufacturers

  • Colchester
  • Voith GmbH

The combination of materials friction pair

  • Metal - Metal
Стандарт Показатель Ед. изм. Значение
ЦветБеловатый
Базовое маслоМинеральное
ЗагустительЗагуститель
Антифрикционные добавки (наполнители)Твердые смазочные материалы
°СВерхний предел рабочих температур твердых смазочных материалов, входящих в состав продукта+250
DIN ISO 2137мм/10Пенетрация неперемешанной смазки250-280
ISO 2811г/см3Плотность при 20 °С1,2
DIN 51 807 pt.1ст. эмульгированияВодостойкость (3 ч, 90 °C)1
DIN 51 802Степень коррозии по методу Emcor (подшипники качения, дистиллированная вода)0
DIN 51 350 pt.4ННагрузка сваривания (испытание на четырехшариковой машине трения, 1450 об/мин/10 с),2600
НКритическая нагрузка (метод Almen-Weiland)20000
DIN 51 350 pt.5ммПоказатель износа (испытание на четырехшариковой машине трения, 1450 об/мин/800 Н/1 ч)1,08
число оборотовСтойкость к фреттинг-коррозии36 х 106
Коэффициент трения для посадки с натягом0,10 (без вибрации)