Engineering solutions in the field of
lubricants and sealants


Operating temperatures

-180°C +240°C

Pre-packing

400ml5kg
  • Applications
  • Friction units
  • Advantages
  • Problems to be solved with this material
  • Related videos
  • The combination of materials
  • Features

Applications

FEATURES

Very low coefficient of friction
Colorless, therefore nonstaining
Detectable on the surface

APPLICATIONS

Suitable for rubber guides, sliding doors, furniture hinges, small mechanisms in office machines and sunroof seals.
For nearly all material combinations such as metal/metal, plastic/metal, plastic/plastic combinations involving slow to medium movements and medium loads.
The UV indicator enables the end user to readily inspect and confirm, using UV inspection lamps, that the product has been applied to the substrate.

It is used in friction

  • Sliding bearings
  • Sliding guideways
  • Enclosed gears
  • Open gears
  • Cased flexible shafts
  • Gaskets

Advantages

  • Cold resistance
  • Termal (heat) resistance
  • Chemical resistance
  • Working capacity in moisture
  • Working capacity in dust
  • Good anticorrosion properties (good corrosion protection)
  • Good adhesion strength
  • Good water washout resistance
  • Good fretting corrosion protection
  • Compatible with many plastics
  • Compatible with many elastomers
  • Aerosol
  • Detectable on the surface (UV-indicator)
  • Air drying
  • Avoidance of stick-slip
  • Excellent anti-squeak performance for plastics and leather
  • Easy mounting / dismounting

Problems to be solved with this material

  • Stick-slip motion
  • Fretting corrosion
  • Details sticking after technological operations (pressure forming, molding, etc...)
  • Dust sticking onto lubricating surfaces
  • Dust intrusion into lubricating points and abrasive wear
  • Corrosion
  • Lubricant wash-out
  • Lubricant destruction of chemically active medium exposure
  • Lubricants leaking off or emission due to centrifugal forces
  • Frequent re-lubrication
  • Difficult mounting / dismounting
  • Plastic and elastomer details deformation and destruction
  • Friction squeaking of plastics and leather
  • Liquid and consistent lubricants application failure

Related videos

Material combination in friction pair

  • Metal - Metal
  • Metal - Plastic
  • Plastic - Plastic
Стандарт Показатель Ед. изм. Значение
ЦветБесцветный
Антифрикционные добавки (наполнители)Твердые смазочные материалы: политетрафторэтилен (ПТФЭ)
Прочие составляющиеОрганический связующий агент (акриловый), растворитель, ультрафиолетовый индикатор
Содержание твердых веществ%23 (расчетное значение)
Диапазон рабочих температур°Сот -180 до +240
DIN 53 211/4Условная вязкость при 20 °С (тигль DIN4)с12
DIN 53 217/2Плотность при 20 °Сг/см30,87
Срок годности при хранениилет2
ASTM D 2714Срок службы (испытание на машине LFW-1 при вращательном движении до коэффициента трения f=0,1 при нагрузке N=680 H, контактном давлении P=475 МПа, частоте вращения n=72 об/мин, скорости скольжения v=7,9 м/мин) для поверхности без предварительной обработки / после фосфатирования / после пескоструйной обработкитыс. оборотов6/30/10
Время сушки при 20 °Смин5-10
Условия отверждения (выдержка/температура)мин/°С120/20