Engineering solutions in the field of
lubricants and sealants


Buy
Есть аналог

Description

Anti-friction coating suitable for material combinations plastic/plastic, plastic/metal, plastic/leather, leather/leather with slow movements or vibrations at low loads.



Operating temperatures

-40°C +80°C

Pre-packing

5kg25kg
  • Applications
  • Friction units
  • Advantages
  • Problems to be solved with this material
  • The combination of materials
  • Features

Applications

FEATURES

Excellent "anti-squeak" performance
Low coefficient of friction
Constant coefficient of friction at different temperatures
Water-based

APPLICATIONS

Reduces or eliminates noise of plastic parts e.g. in automotive applications such as door panels, arm rests, dashboards, glove boxes, etc., as well as leather equipment.
Suitable for material combinations plastic/plastic, plastic/metal, plastic/leather, leather/leather with slow movements or vibrations at low loads.

It is used in friction

  • Sliding guideways
  • Threaded connections
  • Gaskets

Advantages

  • Cold resistance
  • Chemical resistance
  • Working capacity in moisture
  • Working capacity in dust
  • Good adhesion strength
  • Good water washout resistance
  • Compatible with many plastics
  • Air drying
  • Avoidance of stick-slip
  • Excellent anti-squeak performance for plastics and leather

Problems to be solved with this material

  • Stick-slip motion
  • Dust sticking onto lubricating surfaces
  • Dust intrusion into lubricating points and abrasive wear
  • Lubricant wash-out
  • Lubricant destruction of chemically active medium exposure
  • Lubricants leaking off or emission due to centrifugal forces
  • Frequent re-lubrication
  • Plastic and elastomer details deformation and destruction
  • Friction squeaking of plastics and leather
  • Liquid and consistent lubricants application failure

Material combination in friction pair

  • Metal - Metal
  • Metal - Plastic
  • Plastic - Plastic
  • Plastic - Leather
  • Leather - Leather
Стандарт Показатель Ед. изм. Значение
ЦветЧерный
Антифрикционные добавки (наполнители)Твердые смазочные материалы
Прочие составляющиеОрганический связующий агент, вода, стабилизатор
CTM 0242 IСодержание нелетучего остатка%48
Диапазон рабочих температур°Сот -40 до +80
DIN 53 211/4Условная вязкость при 20 °С (тигль DIN4)с18
DIN 53 213Температура вспышки°C70
DIN 53 217/2Плотность при 20 °Сг/см31,3
CTM 0007 ApH при 20 °С8
Срок годности при хранениилет0,75
DIN 53 375-BКоэффициент трения покоя / скольжения (механизм анти-скрип)0,2/0,14
Время сушки при 20 °Смин10-15
Условия отверждения (выдержка/температура)мин/°С120/23

Аналог

Антифрикционное твердосмазочное покрытие на основе политетрафторэтилена

		

		
		
		
		
Яндекс.Метрика