description

Metal surfaces of all kinds in many difficult and extreme environments e.g. metal/metal pairings at extreme loads and slow speeds or metal/plastic pairings at low loads and low to medium speeds.

Applications –

FEATURES

Excellent lubricating properties
Reduction of friction and wear
Resistant to oxidation
Extreme pressure resistance
Wide service temperature range

APPLICATIONS

Molykote Microsize Powder can be used:

as a dry burnished (rubbed-on) lubricating film for metallic contacts
as a solid lubricant additive for self-lubricating plastics and sinter metal parts
as a solid lubricant additive in metalworking compounds
as run-in aid, in press-fittings, in heavy loads and slow speeds applications and also in extreme environments (for example in dusty atmospheres or extremes of temperatures)

It is used in friction

  • Rolling bearings
  • Sliding bearings
  • Sliding guideways
  • Linear bearings
  • Enclosed gears
  • Interference fits
  • Spline / key joints
  • Gaskets

Advantages

  • Cold resistance
  • Termal (heat) resistance
  • Very high load carrying capacity
  • Working capacity in vacuum
  • Working capacity in dust
  • Good adhesion strength
  • Emergency properties
  • Compatible with many plastics
  • Compatible with many elastomers
  • Avoidance of stick-slip
  • Easy mounting / dismounting

Problems to be Solved material

  • Seizure
  • Stick-slip motion
  • Dust sticking onto lubricating surfaces
  • Dust intrusion into lubricating points and abrasive wear
  • Lubricant efficiency loss in vacuum
  • Lubricants leaking off or emission due to centrifugal forces
  • Frequent re-lubrication
  • Difficult mounting / dismounting
  • Plastic and elastomer details deformation and destruction
  • Liquid and consistent lubricants application failure

The combination of materials friction pair

  • Metal - Metal
  • Metal - Plastic
  • Metal - Elastomer

FEATURES

Стандарт
Показатель
Ед. изм.
Значение
Состояние продукта
Поставка в 2010 г. ограничена
Цвет
Черный
Форма продукта
Легко сыпучий порошок
Антифрикционные добавки (наполнители)
Твердые смазочные материалы: дисульфид молибдена - 98%
Содержание воды
%
0,05
Размер частиц
мкм
0,65-0,8
Диапазон рабочих температур
°С
от -185 до +450 (в вакууме до +1100)
Теоретическая плотность в твердом состоянии
г/см3
4,8
Плотность в состоянии порошка
г/см3
0,5
Критическая нагрузка (метод Almen-Weiland)
Н
>20000
Коэффициент трения для посадки с натягом
0,06