Grease Molykote
EM-D110
Description
Lubricating grease developed for plastic components.
Operating temperatures
-10°C +150°C
Pre-packing
1kg16kg
- Applications
- Friction units
- Advantages
- Problems to be solved with this material
- The combination of materials
- Features
Applications
FEATURESCompatible with most plastics
Effective in reducing noise from plastic gears
Long service life
Low seepage, so it can be used in places wherein cleanliness is required
Does not contain silicone thereby preventing problems with contact point failures
APPLICATIONS
Automobiles, electrical appliances, precision equipment, audio equipment and office equipment that have plastic parts.
Used as a damper grease to reduce noise in moving parts such as gears
It is used in friction
Sliding bearings
Sliding guideways
Advantages
- Termal (heat) resistance
- Working capacity in dust
- Long service life
- Compatible with many plastics
- Compatible with many elastomers
- Avoidance of stick-slip
- Noise and vibration damping
Problems to be solved with this material
- Stick-slip motion
- Dust intrusion into lubricating points and abrasive wear
- Frequent re-lubrication
- Plastic and elastomer details deformation and destruction
- Higher rolling bearings noise and vibration
Material combination in friction pair
- Metal - Metal
- Metal - Plastic
- Metal - Elastomer
- Plastic - Plastic
- Plastic - Elastomer
| Стандарт | Показатель | Ед. изм. | Значение |
|---|---|---|---|
| — | Цвет | Белый | |
| — | Базовое масло | Полиальфаолефин | |
| — | Загуститель | Литиевое мыло | |
| — | Антифрикционные добавки (наполнители) | Политетрафторэтилен (ПТФЭ) | |
| — | Диапазон рабочих температур | °С | от -10 до +150 |
| — | Кинематическая вязкость базового масла при 40 °С | мм2/c | 9850 |
| JIS K 2220 | Пенетрация перемешанной смазки (60 циклов) | мм/10 | 360 |
| — | Класс консистенции по NLGI | 0…1 | |
| JIS K 2220 | Температура каплепадения | °C | 195 |
| — | Плотность при 20 °С | г/см3 | 0,86 |
| JIS K 2220 | Потери на испарение (22 ч, 100 °C) | % | 0,2 |
| JIS K 2220 | Выделение масла (24 ч, 100 °C) | % | 2,5 |
| JIS K 2220 | Стойкость к окислению | кПа | 20 |
| JIS K 2220 | Степень коррозии на медной пластине | 1a |